MAIRIX(1)MAIRIX(1)NAMEmairix - index and search mail folders
SYNOPSIS
Indexing
mairix [ -v|--verbose ] [ -p|--purge ] [ -f|--rcfile mairixrc ] [
-F|--fast-index ]
Searching
mairix [ -v|--verbose ] [ -f|--rcfile mairixrc ] [ -r|--raw-output ] [
-x|--excerpt-output ] [ -o|--mfolder mfolder ] [ -a|--augment ] [
-t|--threads ] search-patterns
Other
mairix [ -h|--help ]
mairix [ -V|--version ]
mairix [ -d|--dump ]
DESCRIPTIONmairix indexes and searches a collection of email messages. The fold‐
ers containing the messages for indexing are defined in the configura‐
tion file. The indexing stage produces a database file. The database
file provides rapid access to details of the indexed messages during
searching operations. A search normally produces a folder (so-called
mfolder) containing the matched messages. However, a raw mode (-r)
exists which just lists the matched messages instead.
It can operate with the following folder types
* maildir
* MH (compatible with the MH folder formats used by xmh, sylpheed,
claws-mail, nnml (Gnus) and evolution)
* mbox (including mboxes that have been compressed with gzip or
bzip2)
If maildir or MH source folders are used, and a search outputs its
matches to an mfolder in maildir or MH format, symbolic links are used
to reference the original messages inside the mfolder. However, if
mbox folders are involved, copies of messages are made instead.
OPTIONSmairix decides whether indexing or searching is required by looking for
the presence of any search-patterns on the command line.
Special modes
-h, --help
Show usage summary and exit
-V, --version
Show program version and exit
-d
Dump the database's contents in human-readable form to stdout.
General options
-f mairixrc
--rcfile mairixrc
Specify an alternative configuration file to use. The default
configuration file is ~/.mairixrc.
-v, --verbose
Make the output more verbose
-Q, --no-integrity-checks
Normally mairix will do some internal integrity tests on the
database. The -Q option removes these checks, making mairix run
faster, but it will be less likely to detect internal problems
if any bugs creep in.
The nochecks directive in the rc file has the same effect.
--unlock
mairix locks its database file during any indexing or searching
operation to prevent multiple indexing runs interfering with
each other, or an indexing run interfering with search runs.
The --unlock option removes the lockfile before doing the
requested indexing or searching operation. This is a convenient
way of cleaning up a stale lockfile if an earlier run crashed
for some reason or was aborted.
Indexing options
-p, --purge
Cause stale (dead) messages to be purged from the database dur‐
ing an indexing run. (Normally, stale messages are left in the
database because of the additional cost of compacting away the
storage that they take up.)
-F, --fast-index
When processing maildir and MH folders, mairix normally compares
the mtime and size of each message against the values stored in
the database. If they have changed, the message will be res‐
canned. This check requires each message file to be stat'ed.
For large numbers of messages in these folder types, this can be
a sizeable overhead.
This option tells mairix to assume that when a message currently
on-disc has a name matching one already in the database, it
should assume the message is unchanged.
A later indexing run without using this option will fix up any
rescans that were missed due to its use.
Search options
-a, --augment
Append newly matches messages to the current mfolder instead of
creating the mfolder from scratch.
-t, --threads
As well as returning the matched messages, also return every
message in the same thread as one of the real matches.
-r, --raw-output
Instead of creating an mfolder containing the matched messages,
just show their paths on stdout.
-x, --excerpt-output
Instead of creating an mfolder containing the matched messages,
display an excerpt from their headers on stdout. The excerpt
shows To, Cc, From, Subject and Date.
-o mfolder
--mfolder mfolder
Specify a temporary alternative path for the mfolder to use,
overriding the mfolder directive in the rc file.
mairix will refuse to output search results into any folder that
appears to be amongst those that are indexed. This is to pre‐
vent accidental deletion of emails.
Search patterns
t:word
Match word in the To: header.
c:word
Match word in the Cc: header.
f:word
Match word in the From: header.
s:word
Match word in the Subject: header.
m:word
Match word in the Message-ID: header.
b:word
Match word in the message body.
Message body is taken to mean any body part of type text/plain
or text/html. For text/html, text within meta tags is ignored.
In particular, the URLs inside <A HREF="..."> tags are not cur‐
rently indexed. Non-text attachments are ignored. If there's
an attachment of type message/rfc822, this is parsed and the
match is performed on this sub-message too. If a hit occurs,
the enclosing message is treated as having a hit.
d:[start-datespec]-[end-datespec]
Match messages with Date: headers lying in the specific range.
z:[low-size]-[high-size]
Match messages whose size lies in the specified range. If the
low-size argument is omitted it defaults to zero. If the high-
size argument is omitted it defaults to infinite size.
For example, to match messages between 10kilobytes and 20kilo‐
bytes in size, the following search term can be used:
mairix z:10k-20k
The suffix 'k' on a number means multiply by 1024, and the suf‐
fix 'M' on a number means multiply by 1024*1024.
n:word
Match word occurring as the name of an attachment in the mes‐
sage. Since attachment names are usually long, this option
would usually be used in the substring form. So
mairix n:mairix=
would match all messages which have attachments whose names con‐
tain the substring mairix.
The attachment name is determined from the name=xxx or file‐
name=xxx qualifiers on the Content-Type: and Content-Disposi‐
tion: headers respectively.
F:flags
Match messages with particular flag settings. The available
flags are 's' meaning seen, 'r' meaning replied, and 'f' meaning
flagged. The flags are case-insensitive. A flag letter may be
prefixed by a '-' to negate its sense. Thus
mairix F:-s d:1w-
would match any unread message less than a week old, and
mairix F:f-r d:-1m
would match any flagged message older than a month which you
haven't replied to yet.
Note that the flag characters and their meanings agree with
those used as the suffix letters on message filenames in maildir
folders.
Searching for a match amongst more than one part of a message
Multiple body parts may be grouped together, if a match in any of them
is sought. Common examples follow.
tc:word
Match word in either the To: or Cc: headers (or both).
bs:word
Match word in either the Subject: header or the message body (or
both).
The a: search pattern is an abbreviation for tcf:; i.e. match the word
in the To:, Cc: or From: headers. ("a" stands for "address" in this
case.)
Match words
The word argument to the search strings can take various forms.
~word
Match messages not containing the word.
word1,word2
This matches if both the words are matched in the specified mes‐
sage part.
word1/word2
This matches if either of the words are matched in the specified
message part.
substring=
Match any word containing substring as a substring
substring=N
Match any word containing substring, allowing up to N errors in
the match. For example, if N is 1, a single error is allowed,
where an error can be
* a missing letter
* an extra letter
* a different letter.
^substring=
Match any word containing substring as a substring, with the
requirement that substring occurs at the beginning of the
matched word.
Precedence matters
The binding order of the constructions is:
1. Individual command line arguments define separate conditions
which are AND-ed together
2. Within a single argument, the letters before the colon define
which message parts the expression applies to. If there is no
colon, the expression applies to all the headers listed earlier
and the body.
3. After the colon, commas delineate separate disjuncts, which are
OR-ed together.
4. Each disjunct may contain separate conjuncts, which are sepa‐
rated by plus signs. These conditions are AND-ed together.
5. Each conjunct may start with a tilde to negate it, and may be
followed by a slash to indicate a substring match, optionally
followed by an integer to define the maximum number of errors
allowed.
Date specification
This section describes the syntax used for specifying dates when
searching using the `d:' option.
Dates are specified as a range. The start and end of the range can
both be specified. Alternatively, if the start is omitted, it is
treated as being the beginning of time. If the end is omitted, it is
treated as the current time.
There are 4 basic formats:
d:start-end
Specify both start and end explicitly
d:start-
Specify start, end is the current time
d:-end Specify end, start is 'a long time ago' (i.e. early enough to
include any message).
d:period
Specify start and end implicitly, as the start and end of the
period given.
The start and end can be specified either absolute or relative. A rel‐
ative endpoint is given as a number followed by a single letter defin‐
ing the scaling:
┌────────┬─────────────┬───────────┬───────────────────────┐
│letter │ short for │ example │ meaning │
├────────┼─────────────┼───────────┼───────────────────────┤
│d │ days │ 3d │ 3 days │
│w │ weeks │ 2w │ 2 weeks (14 days) │
│m │ months │ 5m │ 5 months (150 days) │
│y │ years │ 4y │ 4 years (4*365 days) │
└────────┴─────────────┴───────────┴───────────────────────┘
Months are always treated as 30 days, and years as 365 days, for this
purpose.
Absolute times can be specified in many forms. Some forms have differ‐
ent meanings when they define a start date from that when they define
an end date. Where a single expression specifies both the start and
end (i.e. where the argument to d: doesn't contain a `-'), it will usu‐
ally have different interpretations in the two cases.
In the examples below, suppose the current date is Sunday May 18th,
2003 (when I started to write this material.)
┌─────────────────────┬──────────────────────┬───────────────────────┬─────────────────────────────────┐
│Example │ Start date │ End date │ Notes │
├─────────────────────┼──────────────────────┼───────────────────────┼─────────────────────────────────┤
│d:20030301-20030425 │ March 1st, 2003 │ 25th April, 2003 │ │
│d:030301-030425 │ March 1st, 2003 │ April 25th, 2003 │ century assumed │
│d:mar1-apr25 │ March 1st, 2003 │ April 25th, 2003 │ │
│d:Mar1-Apr25 │ March 1st, 2003 │ April 25th, 2003 │ case insensitive │
│d:MAR1-APR25 │ March 1st, 2003 │ April 25th, 2003 │ case insensitive │
│d:1mar-25apr │ March 1st, 2003 │ April 25th, 2003 │ date and month in either order │
│d:2002 │ January 1st, 2002 │ December 31st, 2002 │ whole year │
│d:mar │ March 1st, 2003 │ March 31st, 2003 │ most recent March │
│d:oct │ October 1st, 2002 │ October 31st, 2002 │ most recent October │
│d:21oct-mar │ October 21st, 2002 │ March 31st, 2003 │ start before end │
│d:21apr-mar │ April 21st, 2002 │ March 31st, 2003 │ start before end │
│d:21apr- │ April 21st, 2003 │ May 18th, 2003 │ end omitted │
│d:-21apr │ January 1st, 1900 │ April 21st, 2003 │ start omitted │
│d:6w-2w │ April 6th, 2003 │ May 4th, 2003 │ both dates relative │
│d:21apr-1w │ April 21st, 2003 │ May 11th, 2003 │ one date relative │
│d:21apr-2y │ April 21st, 2001 │ May 11th, 2001 │ start before end │
│d:99-11 │ January 1st, 1999 │ May 11th, 2003 │ 2 digits are a day of the month │
│ │ │ │ if possible, otherwise a year │
│d:99oct-1oct │ October 1st, 1999 │ October 1st, 2002 │ end before now, single digit is │
│ │ │ │ a day of the month │
│d:99oct-01oct │ October 1st, 1999 │ October 31st, 2001 │ 2 digits starting with zero │
│ │ │ │ treated as a year │
│d:oct99-oct1 │ October 1st, 1999 │ October 1st, 2002 │ day and month in either order │
│d:oct99-oct01 │ October 1st, 1999 │ October 31st, 2001 │ year and month in either order │
└─────────────────────┴──────────────────────┴───────────────────────┴─────────────────────────────────┘
The principles in the table work as follows.
· When the expression defines a period of more than a day (i.e. if
a month or year is specified), the earliest day in the period is
taken when the start date is defined, and the last day in the
period if the end of the range is being defined.
· The end date is always taken to be on or before the current
date.
· The start date is always taken to be on or before the end date.
SETTING UP THE MATCH FOLDER
If the match folder does not exist when running in search mode, it is
automatically created. For 'mformat=maildir' (the default), this
should be all you need to do. If you use 'mformat=mh', you may have to
run some commands before your mailer will recognize the folder. e.g.
for mutt, you could do
mkdir -p /home/richard/Mail/mfolder
touch /home/richard/Mail/mfolder/.mh_sequences
which seems to work. Alternatively, within mutt, you could set
MBOX_TYPE to in advance.
If you use Sylpheed, the best way seems to be to create the new folder
from within Sylpheed before letting mairix write into it.
EXAMPLES
Suppose my email address is <richard@doesnt.exist>.
Either of the following will match all messages newer than 3 months
from me with the word 'chrony' in the subject line:
mairix d:3m- f:richard+doesnt+exist s:chrony
mairix d:3m- f:richard@doesnt.exist s:chrony
Suppose I don't mind a few spurious matches on the address, I want a
wider date range, and I suspect that some messages I replied to might
have had the subject keyword spelt wrongly (let's allow up to 2
errors):
mairix d:6m- f:richard s:chrony=2
NOTESmairix works exclusively in terms of words. The index that's built in
indexing mode contains a table of which words occur in which messages.
Hence, the search capability is based on finding messages that contain
particular words. mairix defines a word as any string of alphanumeric
characters + underscore. Any whitespace, punctuation, hyphens etc are
treated as word boundaries.
mairix has special handling for the To:, Cc: and From: headers.
Besides the normal word scan, these headers are scanned a second time,
where the characters '@', '-' and '.' are also treated as word charac‐
ters. This allows most (if not all) email addresses to appear in the
database as single words. So if you have a mail from wibble@foo‐
bar.zzz, it will match on both these searches
mairix f:foobar
mairix f:wibble@foobar.zzz
It should be clear by now that the searching cannot be used to find
messages matching general regular expressions. This has never been
much of a limitation. Most searches are for particular keywords that
were in the messages, or details of the recipients, or the approximate
date.
It's also worth pointing out that there is no 'locality' information
stored, so you can't search for messages that have one words 'close' to
some other word. For every message and every word, there is a simple
yes/no condition stored - whether the message contains the word in a
particular header or in the body. So far this has proved to be ade‐
quate. mairix has a similar feel to using an Internet search engine.
FILES
~/.mairixrc
AUTHOR
Copyright (C) 2002-2006 Richard P. Curnow <rc@rc0.org.uk>
SEE ALSOmairixrc(5)BUGS
We need a plugin scheme to allow more types of attachment to be scanned
and indexed.
January 2006 MAIRIX(1)
