Locale::Codes(3pm) Perl Programmers Reference Guide Locale::Codes(3pm)NAME
Locale::Codes - a distribution of modules to handle locale codes
DESCRIPTION
Locale::Codes is a distribution containing a set of modules. The
modules each deal with different types of codes which identify parts of
the locale including languages, countries, currency, etc.
Currently, the following modules are included:
Locale::Country
This includes support for country codes (such as those listed in
ISO-3166) to specify the country.
Locale::Language
This includes support for language codes (such as those listed in
ISO-639) to specify the language.
Locale::Currency
This includes support for currency codes (such as those listed in
ISO-4217) to specify the currency.
Locale::Script
This includes support for script codes (such as those listed in
ISO-15924) to specify the script.
Each module can support an arbitrary number of code sets, and it it not
required that the relationship between these code sets be one-to-one.
For example, the Locale::Country module supports code sets from
ISO-3166 and the FIPS 10 standard, and they do not break the world down
into exactly the same sets of countries. This does not cause any
problem (though converting codes from ISO-3166 to FIPS or back will not
work except for countries that are one-to-one).
All data in all of these modules comes directly from the original
standards (or as close to direct as possible), so it should be up-to-
date at the time of release.
I plan on releasing a new version a couple of times a year to
incorporate any changes made in the standards. However, I don't always
know about changes that occur, so if any of the standards change, and
you want a new release sooner, just email me and I'll get one out.
NEW CODE SETS
I'm always open to suggestions for new code sets.
In order for me to add a code set, I want the following criteria to be
met:
General-use code set
If a code set is not general use, I'm not likely to spend the time
to add and support it.
An official source of data
I require an official (or at least, a NEARLY official) source where
I can get the data on a regular basis.
Ideally, I'd only get data from an official source, but sometimes
that is not possible. For example the ISO standards are not
typically available for free, so I may have to get some of that
data from alternate sources that I'm confident are getting their
data from the official source.
As an example, I get some country data from the CIA World Factbook.
Given the nature of the source, I'm sure they're updating data from
the official sources and I consider it "nearly" official.
There are many 3rd party sites which maintain lists (many of which
are actually in a more convenient form than the official sites).
Unfortunately, I will reject most of them since I have no feel for
how "official" they are.
A free source of the data
Obviously, the data must be free-of-charge. I'm not interested in
paying for the data (and I'm not interested in the overhead of
having someone else pay for the data for me).
A reliable source of data
The source of data must come from a source that I can reasonably
expect to exist for the foreseeable future since I will be
extremely reluctant to drop support for a data set once it's
included.
I am also reluctant to accept data sent to me by an individual.
Although I appreciate the offer, it is simply not practical to
consider an individual contribution as a reliable source of data.
The source should be an official agency of some sort.
These requirements are open to discussion. If you have a code set you'd
like to see added, but which may not meet all of the above
requirements, feel free to email me and we'll discuss it. Depending on
circumstances, I may be willing to waive some of these criteria.
COMMON ALIASES
As of version 2.00, the modules supported common variants of names.
For example, Locale::Country supports variant names for countries, and
a few of the most common ones are included in the data. The country
code for "United States" is "us", so:
country2code('United States');
=> "us"
Now the following will also return 'us':
country2code('United States of America');
country2code('USA');
Any number of common aliases may be included in the data, in addition
to the names that come directly from the standards. If you have a
common alias for a country, language, or any other of the types of
codes, let me know and I'll add it, with some restrictions.
For example, the country name "North Korea" never appeared in any of
the official sources (instead, it was "Korea, North" or "Korea,
Democratic People's Republic of". I would honor a request to add an
alias "North Korea" since that's a very common way to specify the
country (please don't request this... I've already added it).
On the other hand, a request to add Zaire as an alias for "Congo, The
Democratic Republic of" may not be honored. The country's official name
is not Zaire, so adding it as an alias violates the standard. Zaire
was kept as an alias in versions prior to 3.00, but it has been
removed. Other aliases (if any) which no longer appear in any standard
have also been removed.
ROUTINES
As of 3.10, the interface for all of the modules listed above are
identical (as a matter of fact, they are all just wrappers around a
central module which does all the real work).
In order to maintain the documentation for the modules consistently,
the functions are all documented here, rather than in the documentation
for the separate modules.
The name of the function depends on the module. For example, every
module contains a function "code2XXX" where XXX refers to the type of
data (country, language, currency, or script). So, the Locale::Country
module contains the function code2country, the Locale::Language module
contains the function code2language, etc.
In all of the functions below, CODE refers to a code for one element in
the code set. For example, in the two-letter country codes from ISO
3166-1, the code 'fi' is used to refer to the country Finland. CODE is
always case insensitive (though when a code is returned, it will always
be in the case as used in the standard), so 'fi', 'FI', and 'Fi' would
all be equivalent.
CODESET refers to a constant specified in the documentation for each
module to label the various code sets. For example, in the
Locale::Language module, CODESET could be LOCALE_CODE_ALPHA_2 or
LOCALE_CODE_ALPHA_3 (among others). Most functions have a default one,
so they do not need to be specified. So the following calls are valid:
code2country("fi");
code2country("fi",LOCALE_CODE_ALPHA_2);
code2country("fin",LOCALE_CODE_ALPHA_3);
Since LOCALE_CODE_ALPHA_2 is the default code set, the first two are
identical.
code2country ( CODE [,CODESET] )
code2language( CODE [,CODESET] )
code2currency( CODE [,CODESET] )
code2script ( CODE [,CODESET] )
These functions take a code and returns a string which contains the
name of the element identified. If the code is not a valid code in
the CODESET specified then "undef" will be returned.
The name of the element is the name as specified in the standard,
and as a result, different variations of an element name may be
returned for different values of CODESET.
For example, the alpha-2 country code set defines the two-letter
code "bo" to be "Bolivia, Plurinational State of", whereas the
alpha-3 code set defines the code 'bol' to be the country "Bolivia
(Plurinational State of)". So:
code2country('bo',LOCALE_CODE_ALPHA_2);
=> 'Bolivia, Plurinational State of'
code2country('bol',LOCALE_CODE_ALPHA_3);
=> 'Bolivia (Plurinational State of)'
country2code ( NAME [,CODESET] )
language2code( NAME [,CODESET] )
currency2code( NAME [,CODESET] )
script2code ( NAME [,CODESET] )
These functions takes the name of an element (or any of it's
aliases) and returns the code that corresponds to it, if it exists.
If NAME could not be identified as the name of one of the elements,
then "undef" will be returned.
The name is not case sensitive. Also, any known variation of a name
may be passed in.
For example, even though the country name returned using
LOCALE_CODE_ALPHA_2 and LOCALE_CODE_ALPHA_3 country codes for
Bolivia is different, either country name may be passed in since
for each code set, in addition to the alias 'Bolivia'. So:
country2code('Bolivia, Plurinational State of',
LOCALE_CODE_ALPHA_2);
=> bo
country2code('Bolivia (Plurinational State of)',
LOCALE_CODE_ALPHA_2);
=> bo
country2code('Bolivia',LOCALE_CODE_ALPHA_2);
=> bo
country_code2code ( CODE ,CODESET ,CODESET2 )
language_code2code( CODE ,CODESET ,CODESET2 )
currency_code2code( CODE ,CODESET ,CODESET2 )
script_code2code ( CODE ,CODESET ,CODESET2 )
These functions takes a a code from one code set, and returns the
corresponding code from another code set. CODE must exists in the
code set specified by CODESET and must have a corresponding code in
the code set specified by CODESET2 or "undef" will be returned.
Both CODESETs must be explicitly entered.
country_code2code('fin', LOCALE_CODE_ALPHA_3,
LOCALE_CODE_ALPHA_2);
=> 'fi'
all_country_codes ( [CODESET] )
all_language_codes( [CODESET] )
all_currency_codes( [CODESET] )
all_script_codes ( [CODESET] )
These returns a list of all code in the code set. The codes will be
sorted.
all_country_names ( [CODESET] )
all_language_names( [CODESET] )
all_currency_names( [CODESET] )
all_script_names ( [CODESET] )
These return a list of all elements names for which there is a
corresponding code in the specified code set.
The names returned are exactly as they are specified in the
standard, and are sorted.
Since not all elements are listed in all code sets, the list of
elements may differ depending on the code set specified.
SEMI-PRIVATE ROUTINES
Additional semi-private routines which may be used to modify the
internal data are also available. Given their status, they aren't
exported, and so need to be called by prefixing the function name with
the package name.
Locale::Country::rename_country ( CODE ,NEW_NAME [,CODESET] )
Locale::Language::rename_language( CODE ,NEW_NAME [,CODESET] )
Locale::Currency::rename_currency( CODE ,NEW_NAME [,CODESET] )
Locale::Script::rename_script ( CODE ,NEW_NAME [,CODESET] )
These routines are used to change the official name of an element.
At that point, the name returned by the code2XXX routine would be
NEW_NAME instead of the name specified in the standard.
The original name will remain as an alias.
For example, the official country name for code 'gb' is 'United
Kingdom'. If you want to change that, you might call:
Locale::Country::rename_country('gb', 'Great Britain');
This means that calling code2country('gb') will now return 'Great
Britain' instead of 'United Kingdom'.
If any error occurs, a warning is issued and 0 is returned. An
error occurs if CODE doesn't exist in the specified code set, or if
NEW_NAME is already in use but for a different element.
If the routine succeeds, 1 is returned.
Locale::Country::add_country ( CODE ,NAME [,CODESET] )
Locale::Language::add_language( CODE ,NAME [,CODESET] )
Locale::Currency::add_currency( CODE ,NAME [,CODESET] )
Locale::Script::add_script ( CODE ,NAME [,CODESET] )
These routines are used to add a new code and name to the data.
Both CODE and NAME must be unused in the data set or an error
occurs (though NAME may be used in a different data set).
For example, to create the fictitious country named "Duchy of Grand
Fenwick" with codes "gf" and "fen", use the following:
Locale::Country::add_country("fe","Duchy of Grand Fenwick",
LOCALE_CODE_ALPHA_2);
Locale::Country::add_country("fen","Duchy of Grand Fenwick",
LOCALE_CODE_ALPHA_3);
The return value is 1 on success, 0 on an error.
Locale::Country::delete_country ( CODE [,CODESET] )
Locale::Language::delete_language( CODE [,CODESET] )
Locale::Currency::delete_currency( CODE [,CODESET] )
Locale::Script::delete_script ( CODE [,CODESET] )
These routines are used to delete a code from the data.
CODE must refer to an existing code in the code set.
The return value is 1 on success, 0 on an error.
Locale::Country::add_country_alias ( NAME ,NEW_NAME )
Locale::Language::add_language_alias( NAME ,NEW_NAME )
Locale::Currency::add_currency_alias( NAME ,NEW_NAME )
Locale::Script::add_script_alias ( NAME ,NEW_NAME )
These routines are used to add a new alias to the data. They do not
alter the return value of the code2XXX function.
NAME must be an existing element name, and NEW_NAME must be unused
or an error occurs.
The return value is 1 on success, 0 on an error.
Locale::Country::delete_country_alias ( NAME )
Locale::Language::delete_language_alias( NAME )
Locale::Currency::delete_currency_alias( NAME )
Locale::Script::delete_script_alias ( NAME )
These routines are used to delete an alias from the data. Once
removed, the element may not be referred to by NAME.
NAME must be one of a list of at least two names that may be used
to specify an element. If the element may only be referred to by a
single name, you'll need to use the add_XXX_alias function to add a
new alias first, or the remove_XXX function to remove the element
entirely.
If the alias is used as the name in any code set, one of the other
names will be used instead. Predicting exactly which one will be
used requires you to know the order in which the standards were
read, which is not reliable, so you may want to use the rename_XXX
function to force one of the alternate names to be used.
The return value is 1 on success, 0 on an error.
Locale::Country::rename_country_code ( CODE ,NEW_CODE [,CODESET] )
Locale::Language::rename_language_code( CODE ,NEW_CODE [,CODESET] )
Locale::Currency::rename_currency_code( CODE ,NEW_CODE [,CODESET] )
Locale::Script::rename_script_code ( CODE ,NEW_CODE [,CODESET] )
These routines are used to change the official code for an element.
At that point, the code returned by the XXX2code routine would be
NEW_CODE instead of the code specified in the standard.
NEW_CODE may either be a code that is not in use, or it may be an
alias for CODE (in which case, CODE becomes and alias and NEW_CODE
becomes the "real" code).
The original code is kept as an alias, so that the code2XXX
routines will work with either the code from the standard or the
new code.
However, the all_XXX_codes routine will only return the codes which
are considered "real" (which means that the list of codes will now
contain NEW_CODE, but will not contain CODE).
Locale::Country::add_country_code_alias ( CODE ,NEW_CODE [,CODESET] )
Locale::Language::add_language_code_alias( CODE ,NEW_CODE [,CODESET] )
Locale::Currency::add_currency_code_alias( CODE ,NEW_CODE [,CODESET] )
Locale::Script::add_script_code_alias ( CODE ,NEW_CODE [,CODESET] )
These routines add an alias for the code. At that point, NEW_CODE
and CODE will both work in the code2XXX routines. However, the
XXX2code routines will still return the original code.
Locale::Country::delete_country_code_alias ( CODE [,CODESET] )
Locale::Language::delete_language_code_alias( CODE [,CODESET] )
Locale::Currency::delete_currency_code_alias( CODE [,CODESET] )
Locale::Script::delete_script_code_alias ( CODE [,CODESET] )
These routines delete an alias for the code.
These will only work if CODE is actually an alias. If it is the
"real" code, it will not be deleted. You will need to use the
rename_XXX_code function to switch the real code with one of the
aliases, and then delete the alias.
KNOWN BUGS AND LIMITATIONS
* Because each code set uses a slightly different list of elements,
and they are not necessarily one-to-one, there may be some
confusion about the relationship between codes from different code
sets.
For example, ISO 3166 assigns one code to the country "United
States Minor Outlying Islands", but the FIPS 10 codes give
different codes to different islands (Baker Island, Howland Island,
etc.).
This may cause some confusion... I've done the best that I could do
to minimize it.
* Currently all names must be all ASCII. I plan on relaxing that
limitation in the future.
SEE ALSO
Locale::Constants
Constants for Locale codes.
Locale::Country
Codes for identification of countries.
Locale::Language
Codes for identification of languages.
Locale::Script
Codes for identification of scripts.
Locale::Currency
Codes for identification of currencies and funds.
AUTHOR
Locale::Country and Locale::Language were originally written by Neil
Bowers at the Canon Research Centre Europe (CRE). They maintained the
distribution from 1997 to 2001.
Locale::Currency was originally written by Michael Hennecke.
From 2001 to 2004, maintenance was continued by Neil Bowers. He
modified Locale::Currency for inclusion in the distribution. He also
added Locale::Constants and Locale::Script.
From 2004-2009, the module was unmaintained.
In 2010, maintenance was taken over by Sullivan Beck (sbeck@cpan.org)
with Neil Bower's permission.
COPYRIGHT
Copyright (c) 1997-2001 Canon Research Centre Europe (CRE).
Copyright (c) 2001 Michael Hennecke (Locale::Currency)
Copyright (c) 2001-2010 Neil Bowers
Copyright (c) 2010-2011 Sullivan Beck
This module is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.
perl v5.14.2 2011-09-26 Locale::Codes(3pm)
