svccfg(1M) System Administration Commands svccfg(1M)NAMEsvccfg - import, export, and modify service configurations
SYNOPSIS
/usr/sbin/svccfg [-v] [-s FMRI]
/usr/sbin/svccfg [-v] [-s FMRI] subcommand [args]...
/usr/sbin/svccfg [-v] [-s FMRI] -f command-file
DESCRIPTION
The svccfg command manipulates data in the service configuration repos‐
itory. svccfg can be invoked interactively, with an individual subcom‐
mand, or by specifying a command file that contains a series of subcom‐
mands.
Changes made to an existing service in the repository typically do not
take effect for that service until the next time the service instance
is refreshed. See the refresh subcommand on the svcadm(1M) man page for
more details.
OPTIONS
The following options are supported:
-f command-file
Reads and executes svccfg subcommands from command-file.
-s FMRI
Selects the entity indicated by FMRI (a fault management resource
identifier) before executing any subcommands. See smf(5).
-v
Verbose.
SUBCOMMANDS
Subcommands are divided into the categories specified in the subsec‐
tions that follow.
All subcommands that accept FMRIs also accept abbreviated or globbed
patterns. Instances and services can be abbreviated by specifying the
instance name, or the trailing portion of the service name. For exam‐
ple, given the FMRI:
svc:/network/smtp:sendmail
All the following are valid abbreviations:
sendmail
:sendmail
smtp
smtp:sendmail
network/smtp
While the following are invalid:
mail
network
network/smt
Abbreviated forms of FMRIs are unstable, and should not be used in
scripts or other permanent tools. If a pattern matches more than one
instance or service, an error message is printed and no action is
taken.
General Subcommands
end
exit
quit
Exits immediately.
repository repfile
Uses repfile as a repository. By default, svccfg(1M) uses the sys‐
tem repository.
Use repository only with files from the identical version of
Solaris, including patches, that you are currently running. Do not
use this subcommand with the system repository, /etc/svc/reposi‐
tory.db.
set [-v|-V]
Sets optional behavior. If no options are specified, set displays
the options currently in effect.
-v
Turns on verbose mode.
-V
Turns off verbose mode.
Service Profile Subcommands
apply [-n] file
If a file is a service profile, properties, including gen‐
eral/enabled, that are specified in the file are modified in the
SMF repository. Not-yet-existent properties and property groups
will be created. The type of the pre-existing property groups will
not be changed by the profile. Existing properties (as distin‐
guished from property groups) can have their type changed by the
profile. Nonexistent services and instances are ignored. Services
and instances modified by the profile will be refreshed. If -n is
specified, the profile is processed and no changes are applied to
the SMF repository. Any syntax error found will be reported on
stderr and an exit code of 1 will be returned. See smf(5) for a
description of service profiles. This command requires privileges
to modify properties in the service and instance. See smf_secu‐
rity(5) for the privileges required to modify properties. If file
is not a service profile, the subcommand fails.
extract [> file]
Prints a service profile which represents the enabled status of the
service instances in the repository to standard output. The output
may be redirected to a file.
Service Manifest Subcommands
archive [-a]
Dumps a full XML service description for all services, instances,
and their persistent properties in the repository. This does not
include transient properties such as service state, and is suitable
for a relocatable repository backup.
Without the -a option, property groups containing protected infor‐
mation (identified by the presence of the read_authorization prop‐
erty—see smf_security(5)) will be archived without their property
values. When the -a option is specified, all values will be
archived. An error results if there are insufficient privileges to
read these values.
export [-a] service_FMRI [>file]
The service description for the specified service and its instances
is written to standard output or redirected to the given file.
Dependencies with a boolean "external" property set to true are
omitted in the belief that they were created on behalf of another
service.
Without the -a option, property groups containing protected infor‐
mation (identified by the presence of the read_authorization prop‐
erty—see smf_security(5)) will be exported without their property
values. When the -a option is specified, all values will be
archived. An error results if there are insufficient privileges to
read these values.
Note that export requires a service FMRI. If you specify an
instance (including an abbreviation, such as apache2 or sendmail,
that specifies an instance), the command fails.
import [-V] file
If file is a service manifest, then the services and instances it
specifies are imported into the repository. According to the file,
dependencies may be created in other services. See smf(5) for a
description of service manifests. See smf_security(5) for the priv‐
ileges required to create and modify service configurations.
Services and instances in the manifest will be validated against
template data in the manifest and the repository, and warnings will
be issued for all template violations. See smf_template(5) for a
description of templates. If the -V option is specified, manifests
that violate the defined templates will fail to import. In interac‐
tive invocations of svccfg, -V is the default behavior.
For existing services and instances, properties which have not
changed since the last import snapshot was taken are upgraded to
those specified by the manifest. Conflicts (properties which have
been changed both in the repository and the manifest) are reported
on the standard error stream. svccfg will never upgrade the "gen‐
eral/enabled" and "general/restarter" properties, since they repre‐
sent administrator preference.
inventory file
If file is determined to be a service manifest, then the FMRIs of
the services and instances the file describes are printed. For each
service, the FMRIs of its instances are displayed before the FMRI
of the service.
restore
Restores the contents of the repository from a full XML service
description previously created by the archive subcommand. If the
archive was generated without the use of the -a option, the con‐
tents of the repository following completion of the restore will
not include the values of any read-protected properties (see
smf_security(5)). If these are required, they must be restored man‐
ually.
Restoring an archive which is inconsistent with currently installed
software (including patch revisions) might yield unpredictable
results. Therefore, prior to restoring an archive, all system and
application software, including any service manifests, should be
restored to the same state it was in at the time the archive was
made.
validate [file | fmri]
The validate subcommand can operate on a manifest file, an instance
FMRI, or the current instance or snapshot entity selection. When an
argument is specified, svccfg will check to see whether the speci‐
fied file exists. If the file exists, it will be validated. If a
file of the specified name does not exist, the argument is treated
as an FMRI pattern. If a conflict arises between a filename and an
FMRI, use the svc: and file: prefixes to tell svccfg how to inter‐
pret the argument.
When you specify a file, the file is processed in a manner similar
to import -V, but no changes are made to the repository. If any
errors are detected, svccfg displays the errors and exits with a
nonzero exit status.
For an instance fmri, instance entity selection, or snapshot entity
selection, the specified instance in its composed form (see "Prop‐
erties and Property Groups" in smf(5)) will be validated against
template data in the repository. Instance FMRIs and instance entity
selections use the "running" snapshot for validation. Warnings will
be issued for all template violations. See smf_template(5) for a
description of templates.
Entity Selection, Modification, and Navigation Subcommands
An "entity" refers to a scope, service, or service instance.
add name
A new entity with the given name is created as a child of the cur‐
rent selection. See smf_security(5) for the privileges required to
create entities.
delete [-f] {name | fmri}
The named child of the current selection or the entity specified by
fmri is deleted. Attempts to delete service instances in the
"online" or "degraded" state will fail unless the -f flag is speci‐
fied. If a service or service instance has a "dependents" property
group of type "framework", then for each of its properties with
type "astring" or "fmri", if the property has a single value which
names a service or service instance then the dependency property
group in the indicated service or service instance with the same
name as the property will be deleted. See smf_security(5) for the
privileges required to delete service configurations.
list [pattern]
The child entities of the current selection whose names match the
glob pattern pattern are displayed (see fnmatch(5)). ':properties'
is also listed for property-bearing entities, namely services and
service instances.
select {name | fmri}
If the argument names a child of the current selection, it becomes
the current selection. Otherwise, the argument is interpreted as an
FMRI and the entity that the argument specifies becomes the current
selection.
unselect
The parent of the current selection becomes the current selection.
Property Inspection and Modification Subcommands
addpg name type [flags]
Adds a property group with the given name and type to the current
selection. flags is a string of characters which designates the
flags with which to create the property group. 'P' represents
SCF_PG_FLAG_NONPERSISTENT (see scf_service_add_pg(3SCF)). See
smf_security(5) for the privileges required to create property
groups.
addpropvalue pg/name [type:] value
Adds the given value to a property. If type is given and the prop‐
erty exists, then if type does not agree with the property's type,
the subcommand fails. The values may be enclosed in double-quotes.
String values containing double-quotes or backslashes must be
enclosed by double-quotes and the contained double-quotes and back‐
slashes must be quoted by backslashes. Nonexistent properties are
created, in which case the type specifier must be present. See
scf_value_create(3SCF) for a list of available property types. See
smf_security(5) for the privileges required to modify properties.
The new value will be appended to the end of the list of property
values associated with the property.
delpg name
Deletes the property group name of the current selection. See
smf_security(5) for the privileges required to delete property
groups.
delprop pg[/name]
Deletes the named property group or property of the current selec‐
tion. See smf_security(5) for the privileges required to delete
properties.
delpropvalue pg/name globpattern
Deletes all values matching the given glob pattern in the named
property. Succeeds even if no values match. See smf_security(5) for
the privileges required to modify properties.
describe [-v] [-t] [propertygroup/property]
Describes either the current or the possible settings.
When invoked without arguments, describe gives basic descriptions
(if available) of the currently selected entity and all of its cur‐
rently set property groups and properties. A property group or spe‐
cific property can be queried by specifying either the property
group name, or the property group name and property name, separated
by a slash (/), as an argument.
The -v option gives all information available, including descrip‐
tions for current settings, constraints, and other possible setting
choices.
The -t option shows only the template data for the selection (see
smf_template(5)), and does not display the current settings for
property groups and properties.
editprop
Comments of commands to reproduce the property groups and proper‐
ties of the current selection are placed in a temporary file and
the program named by the EDITOR environment variable is invoked to
edit it. Upon completion, the commands in the temporary file are
executed. The default editor is vi(1). See smf_security(5) for the
privileges required to create, modify, or delete properties.
listpg [pattern]
Displays the names, types, and flags of property groups of the cur‐
rent selection. If an argument is given, it is taken as a glob pat‐
tern and only property groups with names which match the argument
are listed.
In interactive mode, a basic description of the property groups is
also given.
listprop [pattern]
Lists property groups and properties of the current selection. For
property groups, names, types, and flags are listed. For proper‐
ties, names (prepended by the property group name and a slash (/)),
types, and values are listed. See scf_value_create(3SCF) for a list
of available property types. If an argument is supplied it is taken
as a glob pattern and only property groups and properties with
names which match the argument are listed.
setenv [-i | -s] [-m method_name] envvar value
Sets a method environment variable for a service or instance by
changing the "environment" property in the method_name property
group, if that property group has type "method". If method_name
is not specified and the -i option is used, the "method_context"
property group is used, if an instance is currently selected. If
the -s option is used and a service is currently selected, its
"method_context" property group is used. If the -s option is used
and an instance is currently selected, the "method_context" prop‐
erty group of its parent is used. If neither the -i option nor the
-s option is used, the "start" property group is searched for in
the currently selected entity and, if an instance is currently
selected, its parent is also searched. If the "inetd_start" prop‐
erty group is not located, it is searched for in a similiar manner.
Once the property is located, all values which begin with envvar
followed by a "=" are removed, and the value "envvar=value" is
added. See smf_security(5) for the privileges required to modify
properties.
setprop pg/name = [type:] value
setprop pg/name = [type:] ([values ...])
Sets the name property of the pg property group of the current
selection to the given values of type type. See scf_value_cre‐
ate(3SCF) for a list of available property types. If the property
already exists and the type disagrees with the existing type on the
property, the subcommand fails. Values may be enclosed in double-
quotes. String values which contain double-quotes or backslashes
must be enclosed by double-quotes and the contained double-quotes
and backslashes must be quoted by backslashes. If the named prop‐
erty does not exist, it is created, as long as the type is speci‐
fied. See smf_security(5) for the privileges required to create or
modify properties. Multiple values will be stored in the order in
which they are specified.
unsetenv [-i | -s] [-m method_name] envvar value
Removes a method environment variable for a service or instance by
changing the "environment" property in the method_name property
group, if that property group has type "method". If method_name
is not specified and the -i option is used, the "method_context"
property group is used, if an instance is currently selected. If
the -s option is used and a service is currently selected, its
"method_context" property group is used. If the -s option is used
and an instance is currently selected, the "method_context" prop‐
erty group of its parent is used. If neither the -i option nor the
-s option is used, the "start" property group is searched for in
the currently selected entity and, if an instance is currently
selected, its parent is also searched. If the "inetd_start" prop‐
erty group is not located, it is searched for in a similiar manner.
Once the property is located, all values which begin with envvar
followed by "=" are removed. See smf_security(5) for the privileges
required to modify properties.
Snapshot Navigation and Selection Subcommands
listsnap
Displays snapshots available for the currently selected instance.
revert [snapshot]
Reverts the properties of the currently selected instance and its
service to those recorded in the named snapshot. If no argument is
given, use the currently selected snapshot and deselect it on suc‐
cess. The changed property values can be made active via the
refresh subcommand of svcadm(1M). See smf_security(5) for the priv‐
ileges required to change properties.
selectsnap [name]
Changes the current snapshot to the one named by name. If no name
is specified, deselect the currently selected snapshot. Snapshots
are read-only.
Instance Subcommands
refresh
Commit the values from the current configuration to the running
snapshot, making them available for use by the currently selected
instance. If the repository subcommand has not been used to select
a repository, direct the instance's restarter to reread the updated
configuration.
EXAMPLES
Example 1 Importing a Service Description
The following example imports a service description for the seismic
service in the XML manifest specified on the command line.
# svccfg import /var/svc/manifest/site/seismic.xml
Note that the manifest must follow the format specified in service_bun‐
dle(4).
Example 2 Exporting a Service Description
To export a service description on the local system:
# svccfg export dumpadm >/tmp/dump.xml
Example 3 Deleting a Service Instance
To delete a service instance:
# svccfg delete network/inetd-upgrade:default
Example 4 Checking Properties in an Alternate Repository
To examine the state of a service's properties after loading an alter‐
nate repository, use the sequence of commands shown below. One might
use such commands, for example, to determine whether a service was
enabled in a particular repository backup.
# svccfg
svc:> repository /etc/svc/repository-boot
svc:> select telnet:default
svc:/network/telnet:default> listprop general/enabled
general/enabled boolean false
svc:/network/telnet:default> exit
Example 5 Enabling Debugging
To modify LD_PRELOAD for a start method and enable the use of
libumem(3LIB) with debugging features active:
$ svccfg-s system/service setenv LD_PRELOAD libumem.so
$ svccfg-s system/service setenv UMEM_DEBUG default
Example 6 Using describe Subcommand
The following command illustrates the use of the describe subcommand.
# svccfg-s console-login describe ttymon
ttymon application
ttymon/device astring /dev/console
terminal device to be used for the console login prompt
ttymon/label astring console
appropriate entry from /etc/ttydefs
...
ENVIRONMENTAL VARIABLES
EDITOR
The command to run when the editprop subcommand is used. The
default editor is vi(1).
EXIT STATUS
The following exit values are returned:
0
Successful execution.
1
One or more subcommands resulted in failure. Error messages are
written to the standard error stream.
2
Invalid command line options were specified.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
┌─────────────────────────────┬─────────────────────────────┐
│ ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├─────────────────────────────┼─────────────────────────────┤
│Availability │SUNWcs │
├─────────────────────────────┼─────────────────────────────┤
│Interface Stability │See below. │
└─────────────────────────────┴─────────────────────────────┘
The interactive output is Uncommitted. The invocation and non-interac‐
tive output are Committed.
SEE ALSOsvcprop(1), svcs(1), svcadm(1M), svc.configd(1M), libscf(3LIB),
libumem(3LIB), scf_service_add_pg(3SCF), scf_value_create(3SCF), con‐
tract(4), service_bundle(4), attributes(5), fnmatch(5), smf(5),
smf_method(5), smf_security(5), smf_template(5)SunOS 5.11 29 Jun 2009 svccfg(1M)