RSHD(8) OpenBSD System Manager's Manual RSHD(8)NAMErshd - remote shell server
SYNOPSISrshd [-aLln]
DESCRIPTION
The rshd server is the server for the rcmd(3) routine and, consequently,
for the rsh(1) program. The server provides remote execution facilities
with authentication based on privileged port numbers from trusted hosts.
The options are as follows:
-a Ask hostname for verification.
-L Log successful accesses very verbosely.
-l Prevent any authentication based on the user's .rhosts file,
unless the user is logging in as the superuser.
-n Disable keep-alive messages.
The rshd server listens for service requests at the port indicated in the
``cmd'' service specification; see services(5). When a service request
is received the following protocol is initiated:
1. The server checks the client's source port. If the port is not in
the range 512-1023, the server aborts the connection.
2. The server reads characters from the socket up to a null (`\0')
byte. The resultant string is interpreted as an ASCII number, base
10.
3. If the number received in step 2 is non-zero, it is interpreted as
the port number of a secondary stream to be used for the stderr. A
second connection is then created to the specified port on the
client's machine. The source port of this second connection is also
in the range 512-1023.
4. The server checks the client's source address and requests the
corresponding host name (see gethostbyaddr(3), hosts(5) and
named(8)). If the hostname cannot be determined, the dot-notation
representation of the host address is used. If the hostname is in
the same domain as the server (according to the last two components
of the domain name), or if the -a option is given, the addresses for
the hostname are requested, verifying that the name and address
correspond. If address verification fails, the connection is
aborted with the message ``Host address mismatch.''.
5. A null terminated user name of at most 16 characters is retrieved on
the initial socket. This user name is interpreted as the user
identity on the client's machine.
6. A null terminated user name of at most 16 characters is retrieved on
the initial socket. This user name is interpreted as a user
identity to use on the server's machine.
7. A null terminated command to be passed to a shell is retrieved on
the initial socket. The length of the command is limited by the
upper bound on the size of the system's argument list.
8. rshd then validates the user using ruserok(3), which uses the file
/etc/hosts.equiv and the .rhosts file found in the user's home
directory. The -l option prevents ruserok(3) from doing any
validation based on the user's .rhosts file, unless the user is the
superuser.
9. If the file /etc/nologin exists and the user is not the superuser,
the connection is closed.
10. A null byte is returned on the initial socket and the command line
is passed to the normal login shell of the user. The shell inherits
the network connections established by rshd.
Transport-level keepalive messages are enabled unless the -n option is
present. The use of keepalive messages allows sessions to be timed out
if the client crashes or becomes unreachable.
The -L option causes all successful accesses to be logged to syslogd(8)
as auth.info messages.
DIAGNOSTICS
Except for the last one listed below, all diagnostic messages are
returned on the initial socket, after which any network connections are
closed. An error is indicated by a leading byte with a value of 1 (0 is
returned in step 10 above upon successful completion of all the steps
prior to the execution of the login shell).
Locuser too long.
The name of the user on the client's machine is longer than 16
characters.
Ruser too long.
The name of the user on the remote machine is longer than 16
characters.
Command too long.
The command line passed exceeds the size of the argument list (as
configured into the system).
Remote directory.
The chdir(2) command to the home directory failed.
Permission denied.
The authentication procedure described above failed or there is
no password file entry for the specified user.
Can't make pipe.
The pipe needed for the stderr, wasn't created.
Can't fork; try again.
A fork(2) by the server failed.
<shellname>: ...
The user's login shell could not be started. This message is
returned on the connection associated with the stderr, and is not
preceded by a flag byte.
SEE ALSOrsh(1), ssh(1), rcmd(3), ruserok(3)BUGS
The authentication procedure used here assumes the integrity of each
client machine and the connecting medium. This is insecure, so ssh(1)
should be used instead.
A more extensible protocol (such as ssh(1)) should be used.
OpenBSD 4.9 May 31, 2007 OpenBSD 4.9